YOU NEED TO RESTORE YOUR IPHONE OR IPOD – Jailbreak or restore your phone for FREE
November 11, 2009 by admin · Leave a Comment
Stig Kristoffersen asked:
At some time you are in need to restore your iphone or ipod or upgrade it to a new version with more functionality built in it. Bear in mind, there are hardware restrictions, so you can not get GPS functionality on your phone by only installing new software on your iphone. However, you can add functionalities like MMS and its like by upgrading the software.
However, sometimes the software gets corrupted for various reasons, and there is a need to restore your operating system, just like in any other computer you are using.
So instead of giving this job to a shop which will charge you around 20 USD for the job, you can easily do it yourself.
You can restore your iPhone with this FREE tool
http://blog.iphone-dev.org/post/126908912/redsn0w-in-june
Download the redsnOw or Ultrasn0W software for either mac or Windows to your computer and install it. It is not a big file and it is self explanatory how to install it as well.
When you need to restore to a previous or a new version of the software on your iphone, you need to download the firmware first.
These are so-called .IPSW files and exists in various versions:
http://iphonefreakz.com/iphone-firmwares/
Download them to a location you remember on your computer for use later when running the redsn0w software.
Redsn0w will also ask for two bootloaders in its sequence of restoring your phone, these two bootloaders, version 3.9 and 4.6 is needed and you can find them here.
http://cazisoft.com/2008/iphone-bootloader-39-46\
Just download them somewhere on your computer so you can browse for them later when redsn0w asks for these files.
Then after installed the redsn0w software, you start it up, plug in your iphone to your computer, turn the iphone off and leave it off till the software tells you otherwise.
If you experience any problems with the software, you will find the forum at the redsn0w web page very helpful. The devteam does a good job of maintaining this web site and its content.
Redsn0w will now ask for firmware, browse for it where you stored the file, and click next.
Then the software will ask for the two bootload files, browse for them and continue.
The redsn0w will ask you if you want to install three elements, you should choose all three options.
There will be a set of instructions for you to follow now, so be ready to press the on-off button on your iphone and not release it until the software tells you. Then be ready to press the home button for the instructed time.
Then redsn0w will tell you it is jailbreaking your phone and asks you to wait for a while.
If this wait takes more than 5 minutes, then do this; disconnect your iphone for 3 seconds, and plug it in again. This should make redsn0w continue and reboot your iphone.
You will now be the proud owner of a iphone or ipod with a restored or updated operating system or firmware. It is also jailbreaked and can be used with any cell phone operator in the world – no limitations or questions asked.
You have to be aware of the fact that if you do this process, all data on your gadget will be lost – forever. Unless you have done a sync with your itunes and can restore the files from there afterwards.
Just one last crucial reminder in the end- and maybe the most important message to you. Do not, I repeat DO NOT try to upgrade your iphone through iTunes after this. It will only make you get a iphone that is telling you that you have a non-working SIM card and need to replace it. The reason for this is that this firmware you downloaded through iTunes has restored the iphone to its original settings without the jailbreaking, and you have to start redsn0w software again and repeat the same exercise again.
Best of luck with your iphone or ipod and take care.
At some time you are in need to restore your iphone or ipod or upgrade it to a new version with more functionality built in it. Bear in mind, there are hardware restrictions, so you can not get GPS functionality on your phone by only installing new software on your iphone. However, you can add functionalities like MMS and its like by upgrading the software.
However, sometimes the software gets corrupted for various reasons, and there is a need to restore your operating system, just like in any other computer you are using.
So instead of giving this job to a shop which will charge you around 20 USD for the job, you can easily do it yourself.
You can restore your iPhone with this FREE tool
http://blog.iphone-dev.org/post/126908912/redsn0w-in-june
Download the redsnOw or Ultrasn0W software for either mac or Windows to your computer and install it. It is not a big file and it is self explanatory how to install it as well.
When you need to restore to a previous or a new version of the software on your iphone, you need to download the firmware first.
These are so-called .IPSW files and exists in various versions:
http://iphonefreakz.com/iphone-firmwares/
Download them to a location you remember on your computer for use later when running the redsn0w software.
Redsn0w will also ask for two bootloaders in its sequence of restoring your phone, these two bootloaders, version 3.9 and 4.6 is needed and you can find them here.
http://cazisoft.com/2008/iphone-bootloader-39-46\
Just download them somewhere on your computer so you can browse for them later when redsn0w asks for these files.
Then after installed the redsn0w software, you start it up, plug in your iphone to your computer, turn the iphone off and leave it off till the software tells you otherwise.
If you experience any problems with the software, you will find the forum at the redsn0w web page very helpful. The devteam does a good job of maintaining this web site and its content.
Redsn0w will now ask for firmware, browse for it where you stored the file, and click next.
Then the software will ask for the two bootload files, browse for them and continue.
The redsn0w will ask you if you want to install three elements, you should choose all three options.
There will be a set of instructions for you to follow now, so be ready to press the on-off button on your iphone and not release it until the software tells you. Then be ready to press the home button for the instructed time.
Then redsn0w will tell you it is jailbreaking your phone and asks you to wait for a while.
If this wait takes more than 5 minutes, then do this; disconnect your iphone for 3 seconds, and plug it in again. This should make redsn0w continue and reboot your iphone.
You will now be the proud owner of a iphone or ipod with a restored or updated operating system or firmware. It is also jailbreaked and can be used with any cell phone operator in the world – no limitations or questions asked.
You have to be aware of the fact that if you do this process, all data on your gadget will be lost – forever. Unless you have done a sync with your itunes and can restore the files from there afterwards.
Just one last crucial reminder in the end- and maybe the most important message to you. Do not, I repeat DO NOT try to upgrade your iphone through iTunes after this. It will only make you get a iphone that is telling you that you have a non-working SIM card and need to replace it. The reason for this is that this firmware you downloaded through iTunes has restored the iphone to its original settings without the jailbreaking, and you have to start redsn0w software again and repeat the same exercise again.
Best of luck with your iphone or ipod and take care.
Safely Unlocking a iPhone 3G 2.2.1
June 29, 2009 by admin · Leave a Comment
Gen Wright asked:
that iPhone’s have taken the world by storm is undeniable. The uses and features that are inherent with the purchase of an iPhone are quite amazing. So what if you want to take advantage of all the features within a 3G iPhone 2.2.1 but you don’t want to switch your cell phone service provider. This is exactly where terms like unlocking and jail-breaking come into the discussion While there are many people who are aware of the fact that you can unlock iPhones, there are very few who actually understand why or how you would go about performing such actions. The following are some examples of how you can unlock your 3G iPhone.IPHONE UNLOCKINGThe term unlocking is bandied about when discussing the limitations that are placed on iPhones by the Apple software managers. These restrictions prevent your iPhone from using a different carrier then AT&T ( The iPhone is locked to the AT&T Network)and limit your ability to download, install or even use certain applications that you may want to. iPhones are prevented from being used in the same way that an iPod is and you have no real ability to access the system files or change the set up. The term unlocking refers to the process of unlocking these system restrictions and in turn allowing you to use any SIM card, any carrier, and it will also let you access, read and write all types of media and system files in any manner you wish. Essentially this gives you complete control over your 3G iPhone.When the iPhone was first released the iPhone Devteam quickly managed to find a way to unlock the iPhone via a software hack. Via a small program that was available for download freely you could unlock the iPhone within a few minutes. Disadvantage of the software unlock was that this would nullify your warranty with Apple. Apple catched up on the software unlock and closed the security leaks that the Devteam was exploiting, and released a new firmware version for the iphone.Within a week, the Devteam found a new security leak, and they released a new unlock software to fully unlock the iPhone. The cat and mouse game between Apple and the Devteam continued, as Apple released a new version of the iPhone software, permanently closing the secutiry leak. The latest iPhone 3G with software version 2.2.1 ( modem version 2.30.03) can not be unlocked via a software solution. The Devteam promised they will find a new solution, but it seems that the security leak in the iPhone has been closed permanently. Now, how should you go about unlocking your iPhone to take advantage of all the benefits? The best and currently only option to unlock the iphone 3G 2.2.1 is by using an unlock sim. The entire iPhone unlocking process is as easy as inserting a simcard in the iPhone. This card was tested by iPhone unlocking experts and you can be sure that every precaution and tip will be explained in the membersarea in order to unlock and optimise your 3G iPhone 2.2.1 in the safest way possible.Main benefit of unlocking the iPhone via this small hardware sim is that the phone will stay unlocked when Apple releases the next firmware update, and the unlock will not void your Apple Warranty, like with software unlocks.
that iPhone’s have taken the world by storm is undeniable. The uses and features that are inherent with the purchase of an iPhone are quite amazing. So what if you want to take advantage of all the features within a 3G iPhone 2.2.1 but you don’t want to switch your cell phone service provider. This is exactly where terms like unlocking and jail-breaking come into the discussion While there are many people who are aware of the fact that you can unlock iPhones, there are very few who actually understand why or how you would go about performing such actions. The following are some examples of how you can unlock your 3G iPhone.IPHONE UNLOCKINGThe term unlocking is bandied about when discussing the limitations that are placed on iPhones by the Apple software managers. These restrictions prevent your iPhone from using a different carrier then AT&T ( The iPhone is locked to the AT&T Network)and limit your ability to download, install or even use certain applications that you may want to. iPhones are prevented from being used in the same way that an iPod is and you have no real ability to access the system files or change the set up. The term unlocking refers to the process of unlocking these system restrictions and in turn allowing you to use any SIM card, any carrier, and it will also let you access, read and write all types of media and system files in any manner you wish. Essentially this gives you complete control over your 3G iPhone.When the iPhone was first released the iPhone Devteam quickly managed to find a way to unlock the iPhone via a software hack. Via a small program that was available for download freely you could unlock the iPhone within a few minutes. Disadvantage of the software unlock was that this would nullify your warranty with Apple. Apple catched up on the software unlock and closed the security leaks that the Devteam was exploiting, and released a new firmware version for the iphone.Within a week, the Devteam found a new security leak, and they released a new unlock software to fully unlock the iPhone. The cat and mouse game between Apple and the Devteam continued, as Apple released a new version of the iPhone software, permanently closing the secutiry leak. The latest iPhone 3G with software version 2.2.1 ( modem version 2.30.03) can not be unlocked via a software solution. The Devteam promised they will find a new solution, but it seems that the security leak in the iPhone has been closed permanently. Now, how should you go about unlocking your iPhone to take advantage of all the benefits? The best and currently only option to unlock the iphone 3G 2.2.1 is by using an unlock sim. The entire iPhone unlocking process is as easy as inserting a simcard in the iPhone. This card was tested by iPhone unlocking experts and you can be sure that every precaution and tip will be explained in the membersarea in order to unlock and optimise your 3G iPhone 2.2.1 in the safest way possible.Main benefit of unlocking the iPhone via this small hardware sim is that the phone will stay unlocked when Apple releases the next firmware update, and the unlock will not void your Apple Warranty, like with software unlocks.
Translate
Twitter
